Click image to view full size image
Unipsan 36 Invar Alloy pipe
Classification : low coefficient of thermal expansion alloy
Application: Invar is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, television shadow-mask frames, valves in motors, and antimagnetic watches. In land surveying, when first-order (high-precision) elevation leveling is to be performed, the leveling rods used are made of Invar, instead of wood, fiberglass, or other metals. Invar struts were used in some pistons to limit their thermal expansion inside their cylinders.
Chemical Composition in %, Invar
Basic physical constants and mechanical properties of the alloy:
Density: γ = 8,1 g / cm3;
Electric resistivity: ρ = 0,78 ohm mm2 ? / m;
The temperature of the Curie point: Θs = 230 ° C;
Modulus of elasticity E = 144 kN / mm2;
Linear expansion coefficient a1 (20-100 ºC) ≤1,5 * 10-6 ºC -1
All offered "Shanghai Tankii Alloy Material Co., Ltd" of rolled metal products Invar differs guaranteed high quality. Customers can buy Invar alloy for the production of different types of products and rely on the high-speed supply of rolled metal.
Classification : low coefficient of thermal expansion alloy
Application: Invar is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, television shadow-mask frames, valves in motors, and antimagnetic watches. In land surveying, when first-order (high-precision) elevation leveling is to be performed, the leveling rods used are made of Invar, instead of wood, fiberglass, or other metals. Invar struts were used in some pistons to limit their thermal expansion inside their cylinders.
Chemical Composition in %, Invar
|
Ni 35-37% |
Fe . |
C 0.05% |
Si 0.3% |
Mn 0,3-0,6 % |
S o 0.015% |
|
P 0.015% |
Mo 0.1% |
V 0.1% |
Al 0.1% |
Cu 0.1% |
Cr 0,15 % |
Basic physical constants and mechanical properties of the alloy:
Density: γ = 8,1 g / cm3;
Electric resistivity: ρ = 0,78 ohm mm2 ? / m;
The temperature of the Curie point: Θs = 230 ° C;
Modulus of elasticity E = 144 kN / mm2;
Linear expansion coefficient a1 (20-100 ºC) ≤1,5 * 10-6 ºC -1
| Temperature Range/ºC | 1/10-6ºC-1 | Temperature Range/ºC | 1/10-6ºC-1 |
| 20~-60 | 1.8 | 20~250 | 3.6 |
| 20~-40 | 1.8 | 20~300 | 5.2 |
| 20~-20 | 1.6 | 20~350 | 6.5 |
| 20~0 | 1.6 | 20~400 | 7.8 |
| 20~50 | 1.1 | 20~450 | 8.9 |
| 20~100 | 1.4 | 20~500 | 9.7 |
| 20~150 | 1.9 | 20~550 | 10.4 |
| 20~200 | 2.5 | 20~600 | 11 |
All offered "Shanghai Tankii Alloy Material Co., Ltd" of rolled metal products Invar differs guaranteed high quality. Customers can buy Invar alloy for the production of different types of products and rely on the high-speed supply of rolled metal.